Ford 2011 Escape v.4 Manuel d'utilisateur télécharger pdf (Page 227)

1. Hold the clutch pedal down and

move the gearshift lever into the

neutral position.

2. From the neutral position, move

the gearshift lever all the way to the

right, then move it down into the R

(Reverse) position.

Note: The gearshift lever can only

be moved into R (Reverse) by moving it from left of 3 (Third) and 4

(Fourth) before shifting into R (Reverse). This is a lockout feature that

protects the transmission from accidentally being shifted into R

(Reverse) from 5 (Fifth).

If R (Reverse) is not fully engaged, press the clutch pedal down and

return the gearshift to the neutral position. Release the clutch pedal for

a moment, then press it down and shift to R (Reverse) again.

Parking your vehicle

1. Apply the brake and shift into the neutral position.

2. Fully apply the parking brake, hold the clutch pedal down, then shift

into 1 (First).

3. Turn the ignition off.

WARNING: Do not park your vehicle in Neutral, it may move

unexpectedly and injure someone. Use 1 (First) gear and set the

parking brake fully.

REVERSE SENSING SYSTEM (IF EQUIPPED)

The reverse sensing system (RSS) sounds a tone to warn the driver of

obstacles near the rear bumper when R (Reverse) is selected and the

vehicle is moving at speeds less than 3 mph (5 km/h). The system is not

effective at speeds above 3 mph (5 km/h) and may not detect certain

angular or moving objects.

WARNING: To help avoid personal injury, please read and

understand the limitations of the reverse sensing system as

contained in this section. Reverse sensing is only an aid for some

(generally large and fixed) objects when moving in reverse on a flat

surface at “parking speeds”. Inclement weather may also affect the

function of the RSS; this may include reduced performance or a false

activation.

Driving

227

2011 Escape (204)

Owners Guide, 4th Printing

USA (fus)

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 367 368

Pas de commentaire

Ford 2011 Escape v.4 Manuel d'utilisateur Page 227