Ford 2010 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 292)

100

101

3. Put the jack in the jack notch

next to the tire you are changing.

Turn the jack handle clockwise until

the wheel is completely off the

ground.

Note: DO NOT LIFT ON THE

PLASTIC MOLDING, as this could

damage the molding. ONLY LIFT ON

THE SHEET METAL NOTCH.

4. Remove the lug nuts with the lug

wrench.

5. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

6. Lower the wheel by turning the jack handle counterclockwise.

7. Remove the jack and fully tighten

the lug nuts in the order shown.

Refer to Wheel lug nut torque

specifications later in this chapter

for the proper lug nut torque

specification.

8. Install the wheel cover (if

equipped). The wheel cover will

only install if the Ford/Mercury logo

is aligned over the valve stem on the

wheel.

Roadside Emergencies

292

2010 Taurus (500)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 287 288 289 290 291 292 293 294 295 296 297 ... 377 378

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Taurus v.1 Manuel d'utilisateur Page 292

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Taurus v.1