Ford 2010 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 114)

100

101

Keyless entry keypad autolock enable/disable procedure

1. Turn the ignition off.

2. Close all the doors.

3. Enter factory–set 5–digit entry

code.

4. Press and hold the 3 • 4. While

holding the 3 • 4pressthe7• 8.

5. Release the 7 • 8.

6. Release the 3 • 4.

The user will receive a horn chirp to indicate the system has been

disabled or a chirp followed by a honk to indicate the system has been

enabled.

Autounlock feature

The autounlock feature will unlock all the doors when:

• the ignition is on, all the doors are closed, and the vehicle has been in

motion at a speed greater than 12 mph (20 km/h);

• the vehicle has then come to a stop and the ignition is turned off or to

accessory; and

• the driver door is opened within 10 minutes of the ignition being

turned off or to accessory.

Note: The doors will not autounlock if the vehicle has been

electronically locked before the driver door is opened.

Deactivating/activating autounlock feature

Your vehicle comes with the autounlock features activated; there are four

methods to enable/disable this feature:

• Through your authorized dealer,

• by using a power door unlock/lock sequence,

• using a keypad procedure, or

• by using the instrument cluster message center. Refer to Message

center in the Instrument Cluster chapter.

Locks and Security

114

2010 Taurus (500)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 377 378

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Taurus v.1 Manuel d'utilisateur Page 114

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Taurus v.1