Ford 2010 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 293)

100

101

Add the proper mixture of coolant and water to the cooling system by

following these steps:

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (an opaque plastic bottle).

Slowly turn cap counterclockwise (left) until pressure begins to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

• 2.5L coolant bleed valve

• 3.0L coolant bleed valve

5. Open the coolant bleed valve on the back of the engine water outlet

for the 2.5L engine or in the thermostat housing for the 3.0L engine.

6. Fill the coolant reservoir slowly with the proper coolant mixture (see

above), to within the “COLD FILL RANGE” or the “FULL COLD” level on

the reservoir.

7. Close the bleed valve and reinstall the cap on the coolant reservoir.

Turn the cap until it is tightly installed to prevent coolant loss.

2010 Fusion (fsn)

Owners Guide, 1st Printing

USA (fus)

Maintenance and Specifications

293

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 337 338

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Fusion v.1 Manuel d'utilisateur Page 293

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Fusion v.1