Ford 2010 Fusion v.1 Manuel d'utilisateur télécharger pdf (Page 161)

4. Insert the belt tongue into the

proper buckle (the buckle closest to

the direction the tongue is coming

from) for that seating position until

you hear a snap and feel the latch

engage. Make sure the tongue is

latched securely by pulling on it.

5. To put the retractor in the

automatic locking mode, grasp the

shoulder portion of the belt and pull

downward until all of the belt is

pulled out.

6. Allow the belt to retract to remove slack. The belt will click as it

retracts to indicate it is in the automatic locking mode.

7. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more belt

out). If the retractor is not locked, repeat Steps 5 and 6.

Remove remaining slack from the

belt. Force the seat down with extra

weight, e.g., by pressing down or

kneeling on the child restraint while

pulling up on the shoulder belt in

order to force slack from the belt.

This is necessary to remove the

remaining slack that will exist once

the additional weight of the child is

added to the child restraint. It also

helps to achieve the proper snugness

of the child seat to the vehicle.

2010 Fusion (fsn)

Owners Guide, 1st Printing

USA (fus)

Seating and Safety Restraints

161

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 337 338

Pas de commentaire

Ford 2010 Fusion v.1 Manuel d'utilisateur Page 161