Ford 2010 Focus v.3 Manuel d'utilisateur télécharger pdf (Page 233)

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

tightly until clicks are heard, or until it is snug.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil

Only use oils certified for gasoline engines by the American Petroleum

Institute (API). An oil with this trademark symbol conforms to the

current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine and engine’s warranty, use Motorcraft威 SAE

5W-20 or an equivalent SAE 5W-20 oil meeting Ford specification

WSS-M2C930-A. SAE 5W-20 oil provides optimum fuel economy and

durability performance meeting all requirements for your

vehicle’s engine. Refer to Maintenance product specifications and

capacities later in this chapter for more information.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Maintenance and Specifications

233

2010 Focus (foc)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 274 275

Pas de commentaire

Ford 2010 Focus v.3 Manuel d'utilisateur Page 233