Ford 2010 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 80)

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock威 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least one second, but no more

than 10 seconds.

3. Turn the ignition to the 1 (off)

position.

4. Remove the previously programmed coded key from the ignition.

5. After three seconds but within 10 seconds of removing the previously

programmed coded key, insert the other previously programmed coded

key into the ignition.

6. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least one second but not more

than 10 seconds.

7. Turn the ignition to the 1 (off) position.

8. Remove the previously programmed coded key from the ignition.

9. After three seconds but within twenty seconds of removing the

previously programmed coded key, insert the unprogrammed key

(new/valet key) into the ignition.

10. Turn the ignition from the 1 (off) position to the 3 (on) position.

Keep the ignition in the 3 (on) position for at least one second, but no

more than 10 seconds.

11. Your new, unprogrammed key is now programmed.

If the key has been successfully programmed it will start the vehicle’s

engine and the theft indicator light will illuminate for three seconds and

then go out.

Locks and Security

2010 Focus (foc)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 274 275

Pas de commentaire

Ford 2010 Focus v.1 Manuel d'utilisateur Page 80