Ford 2010 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 122)

100

101

Bed divider: This panel will keep small items up to 400 lb (180 kg) in

position in the pickup box. Also includes T-slots to allow attachment of

industry-standard roof rack accessories.

• To remove bed divider, lift handle on each side and lift end support

shroud off of the cleat.

• To install bed divider, align cleats directly across from each other on

the lower rail. Then place divider end support onto the cleats and

press down on each side until the latch handle cycles up then press

the handle down to secure (pull up on the divider to ensure they are

securely attached).

• To install accessories into T-slots, remove bed divider, then find the

slip joint end, indicated with an arrow embossed on the support. Using

a T25 Torx driver, remove two Torx head bolts and slide end support

off of the aluminum extrusion. Insert accessory into desired T-slot and

install end support. When tightening Torx head bolts, hand tightening

with a Torx driver is sufficient, DO NOT over torque by using a

ratchet.

Driver Controls

122

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 413 414

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 F-150 v.2 Manuel d'utilisateur Page 122

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 F-150 v.2