Ford 2010 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 143)

Automatic arming

The vehicle is armed immediately after switching the ignition to the off

position.

Automatic disarming

Switching the ignition to the on position with a coded key disarms the

vehicle.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to an authorized dealer. The

key codes need to be erased from your vehicle and new coded keys will

need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only

SecuriLock威 keys can be used. To program a coded key yourself, you

will need two previously programmed coded keys (keys that already

operate your vehicle’s engine) and the new unprogrammed key(s) readily

accessible for timely implementation of each step in the procedure.

If two previously programmed coded keys are not available, you must

bring your vehicle to your authorized dealer to have the spare coded

key(s) programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least three seconds, but no

more than 10 seconds.

3. Turn the ignition to the 1 (off)

position and remove the first coded

key from the ignition.

Locks and Security

143

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 413 414

Pas de commentaire

Ford 2010 F-150 v.2 Manuel d'utilisateur Page 143