Ford 2010 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 82)

100

101

Replacing high-mount brake and cargo lamp bulbs

Make sure the headlamp control is

in the off position.

1. Remove the two screws and move

the lamp assembly away from the

vehicle to expose the bulb sockets.

2. Remove the bulb socket by rotating counterclockwise and pulling it

out of the lamp assembly.

3. Pull the bulb straight out of the socket and push in the new bulb.

Install the new bulbs in reverse order.

Replacing fog lamp bulbs (if equipped)

1. Make sure the headlamp control

is in the off position.

2. Remove the bulb socket from the

fog lamp by turning

counterclockwise.

3. Disconnect the electrical

connector from the fog lamp bulb.

Install the new bulb in reverse order.

Replacing exterior mounted mirror turn signal indicator lamp bulbs

For bulb replacement, see your authorized dealer.

Replacing license plate lamp bulbs

The license plate bulbs are located

behind the rear bumper. To change

the license plate lamp bulbs:

1. Reach behind the rear bumper to

locate the bulb.

2. Twist the bulb socket

counterclockwise and carefully pull

to remove it from the lamp

assembly.

3. Pull out the old bulb from the

socket and push in the new bulb.

4. Install the bulb socket in lamp assembly by turning it clockwise.

Lights

2010 F-150 (f12)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 413 414

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 F-150 v.2 Manuel d'utilisateur Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 F-150 v.2