Ford 2010 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 244)

100

101

Front axle jacking points:

Place the jack under the pin on the

front surface of the front axle.

Do not place the jack under or

on the steering linkage.

3. Raise the jack until the wheel is

completely off the ground. (Turn

jack handle clockwise if your vehicle

is equipped with a screw-type jack

or pump the jack if equipped with a

hydraulic jack.)

4. Remove the lug nuts with the lug

nut wrench.

5. Replace the flat tire with the

spare tire.

If your vehicle has single rear wheels, thread the lug nuts on the studs

with the beveled face toward the wheel.

If your vehicle has dual rear wheels, thread the two element swiveling

lug nuts on the studs with the flange facing toward the wheel.

6. Use the lug nut wrench to screw the lug nut snugly against the wheel.

7. Lower the vehicle by turning the jack handle counterclockwise.

8. Remove the jack and fully tighten the lug nuts in the following pattern

(Refer to Wheel lug nut torque specifications later in this chapter for

the proper lug nut torque specification):

Roadside Emergencies

244

2010 Econoline (eco)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 326 327

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 E-450 v.3 Manuel d'utilisateur Page 244

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 E-450 v.3