Ford 2010 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 223)

Driving with blind spot mirrors

Before a lane change, check the

main mirror first, then check the

blind spot mirror. If no vehicles are

present in the blind spot mirror and

the traffic in the adjacent lane is at

a safe distance, signal that you are

going to change lanes. Glance over

your shoulder to verify traffic is

clear, and carefully change lanes.

When the approaching vehicle is at

a distance, its image is small and

near the inboard edge of the main

mirror. As the vehicle approaches,

the image becomes larger and

begins to move outboard across the

main mirror (1). As the vehicle

approaches its image will transition

from the main mirror and begin to

appear in the blind spot mirror (2).

As the vehicle leaves the blind spot

mirror it will transition to the driver’s peripheral field of view (3).

WARNING: Objects in the blind spot mirror are closer than they

appear.

VEHICLE USED AS A STATIONARY POWER SOURCE

Auxiliary equipment called power take-off or PTO, is often added to the

engine or transmission to operate utility equipment. Examples include a

wheel-lift for tow trucks, cranes, tools for construction or tire service and

pumping fluids. PTO applications draw auxiliary horsepower from the

powertrain, often while the vehicle is stationary. In this condition, there

is limited cooling air flow through the radiator and around the vehicle

that normally occurs when a vehicle is moving. The aftermarket PTO

system installer, having the most knowledge of the final application, is

responsible for determining whether additional chassis heat protection or

powertrain cooling is required, and alerting the user to the safe and

proper operation.

Driving

223

2010 Econoline (eco)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 326 327

Pas de commentaire

Ford 2010 E-450 v.3 Manuel d'utilisateur Page 223