Ford 2008 F-550 v.3 Manuel d'utilisateur Page 251

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 392
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 250
Exceeding these limits may allow water to enter critical vehicle
components, adversely affecting driveability, emissions and reliability.
Replace front and rear axle lubricants any time the axles have been
submerged in water. Axle lubricant quantities are not to be checked
unless a leak is suspected.
RECREATIONAL TOWING
An example of recreational towing is towing your vehicle behind a
motorhome. The following recreational towing guidelines are designed to
ensure that your transmission is not damaged.
Transmission Drivetrain
configuration
Requirements for
neutral towing
Manual 4x2 Remove driveshaft
1
Automatic
Manual 4x4 with manual-shift
transfer case
Transmission in
Neutral; Transfer case
in N (Neutral);
Hublocks set to FREE
2
Automatic
Manual 4x4 with
electronic-shift
transfer case
Transmission in
neutral; Remove rear
driveshaft; Transfer
case set to 2WD
4
;
Hublocks set to
AUTO
2, 3
Automatic
1
Ford recommends the driveshaft be removed/installed only by a
qualified technician. See your local authorized dealer for driveshaft
removal/installation. Improper removal/installation of the driveshaft
can cause transmission fluid loss, damage to the driveshaft and
internal transmission components.
2
Always make sure that both hub locks are set to the same position.
3
To ensure the automatic hub locks are unlocked, cycle the hub lock dial
from AUTO to LOCK and back to AUTO.
4
To ensure the transfer case is in 2WD, turn the ignition key on, then
shift to 2WD. The 4x4 HIGH light or 4x4 LOW light should not be
illuminated in the instrument cluster; if either one is illuminated, the
transfer case is not in 2WD.
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)
Tires, Wheels and Loading
251
Vue de la page 250
1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 391 392

Commentaires sur ces manuels

Pas de commentaire