Ford 2008 F-550 v.3 Manuel d'utilisateur télécharger pdf (Page 262)

AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED)

Brake-shift interlock

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the 3 (ON) position and the brake pedal is not depressed.

If you cannot move the gearshift lever out of the P (Park) position with

the ignition in the 3 (ON) position and the brake pedal depressed:

1. Apply the parking brake. Turn the

ignition key to 1 (OFF/LOCK), then

remove the key. Locate the access

cover plate for the brake-shift

interlock override. It is located on

top of the steering column shroud.

2. Apply the brake. Use a tool (or a

small screwdriver) to pry out the

access cover. Insert the tool into the

access hole and slide the white

override button towards the left.

Move the gear shift lever into N

(Neutral) while holding the white

override disc towards the left.

When the key is in the ignition and in the OFF position, the

automatic transmission shift lever can be moved from the P

(Park) position without the brake pedal depressed. To avoid unwanted

vehicle movement, always set the parking brake.

3. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,

it is possible that a fuse has blown or the vehicle’s brakelamps are not

operating properly. Refer to Fuses and relays in the Roadside

Emergencies chapter.

Do not drive your vehicle until you verify that the brakelamps

are working.

2008 F-250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

262

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 391 392

Pas de commentaire

Ford 2008 F-550 v.3 Manuel d'utilisateur Page 262