Ford 2008 F-550 v.3 Manuel d'utilisateur télécharger pdf (Page 348)

100

101

• If the oil level is below the MIN

mark, add enough oil to raise the

level within the MIN-MAX range.

• Oil levels above the MAX mark may cause engine damage. Some oil

must be removed from the engine by a service technician.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil dipstick and/or the engine oil filler cap removed.

2008 F-250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

348

1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 391 392

Commentaires sur ces manuels

Pas de commentaire

Ford 2008 F-550 v.3 Manuel d'utilisateur Page 348

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2008 F-550 v.3