Ford 2008 F-550 v.3 Manuel d'utilisateur télécharger pdf (Page 152)

Note: Replacement of the battery will not cause the remote transmitter

to become deprogrammed from your vehicle. The remote transmitter

should operate normally after battery replacement.

Replacing lost remote entry transmitters

If you would like to have your remote entry transmitter reprogrammed

because you lost one, or would like to buy additional remote entry

transmitters, you can either reprogram them yourself, or take all

remote entry transmitters to your authorized dealer for

reprogramming.

Note: If your vehicle is equipped with the memory seats/power

mirrors/adjustable pedals feature, you can associate a remote entry

transmitter to each memory position using this procedure. The first

transmitter that is programmed will recall Driver 1 settings, and the

second transmitter that is programmed will recall Driver 2 settings.

How to program your remote entry transmitters

You must have all remote keyless entry keypads and remote entry

transmitters (maximum of four) available before beginning this

procedure. Note: Do not press the brake pedal anytime during this

sequencing, as doing so will invalidate the procedure.

To reprogram the remote entry

transmitters:

1. Ensure the vehicle is

electronically unlocked.

2. Put the key in the ignition.

3. Cycle eight times rapidly (within

10 seconds) between the 1

(OFF/LOCK) position and 3 (ON).

Note: The eighth turn must end in

the 3 (ON) position. The doors will

lock, then unlock, to confirm that the programming mode has been

activated.

4. Within 20 seconds press any button on the remote entry transmitter.

Note: If more than 20 seconds have passed you will need to start the

procedure over again. The doors will lock, then unlock, to confirm that

this remote entry transmitter has been programmed.

5. Repeat Step 4 to program each additional remote entry transmitter.

2008 F-250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

152

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 391 392

Pas de commentaire

Ford 2008 F-550 v.3 Manuel d'utilisateur Page 152