Ford 2006 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 86)

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone adjustment.

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic

location by referring to the zone

map.

2. Turn ignition to the ON position.

3. Start the engine.

4. Press the ODO reset button in

the cluster, hold for six seconds and

release. You will see that ZONE

appears in the instrument cluster

display.

5. Press and release the button until the desired zone number appears.

Note: The range of zone values are from 01 to 15 and “wraps” back to

01.

6. When you get to the desired ZONE number, hold the button down to

“lock in” the new value.

The cluster display will return to the “normal” mode when the button

has not been pressed for 6 seconds.

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and

high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

123

6 7 8 9 1011

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 335 336

Pas de commentaire

Ford 2006 F-150 v.3 Manuel d'utilisateur Page 86