Ford 2006 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 303)

POWER STEERING FLUID

Check the power steering fluid. Refer to the scheduled maintenance

information for the service interval schedules. If adding fluid is

necessary, use MERCON威 ATF.

1. Start the engine and let it run

until it reaches normal operating

temperature (the engine coolant

temperature gauge indicator will be

near the center of the normal area

between H and C).

2. While the engine idles, turn the

steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN

and MAX lines. Do not add fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN and MAX lines. Be

sure to put the cap back on the reservoir.

BRAKE FLUID

The fluid level will drop slowly as

the brakes wear, and will rise when

the brake components are replaced.

Fluid levels between the “MIN” and

“MAX” lines are within the normal

operating range; there is no need to

add fluid. If the fluid levels are

outside of the normal operating

range the performance of the

system could be compromised; seek

service from your authorized dealer

immediately.

CLUTCH FLUID (IF EQUIPPED)

Check the fluid level. Refer to scheduled maintenance information for

the service interval schedules.

During normal operation, the fluid level in the clutch reservoir should

remain constant. If the fluid level drops, refill the fluid level to the step

in the reservoir.

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

303

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 335 336

Commentaires sur ces manuels

Pas de commentaire

Ford 2006 F-150 v.3 Manuel d'utilisateur Page 303

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2006 F-150 v.3