Ford 2006 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 131)

Safety belt pretensioner

Your vehicle is equipped with safety belt buckle pretensioners at the

driver and front outboard passenger seating positions.

Do NOT place objects between the seats, as this could interfere

with the functioning of the pretensioner.

The driver and front outboard passenger safety belt pretensioners are

designed to activate only during certain frontal or near-frontal collisions

with sufficient longitudinal deceleration. A safety belt buckle

pretensioner is a device which tightens the webbing of the lap and

shoulder belts during some collisions in such a way that they fit more

snugly against the body.

The driver and front outboard passenger safety belt system (including

retractors, buckles and height adjusters) must be replaced if the vehicle

is involved in a collision that results in the activation of the safety belt

pretensioners. Refer to the Safety belt maintenance section in this

chapter.

Failure to replace the safety belt assembly under the above

conditions could result in severe personal injuries in the event of

a collision.

Safety belt usage sensors

The driver and front outboard passenger safety belt buckles are

equipped with sensors that detect if the safety belts are fastened. The

sensors provide information to the Personal Safety System which can

then adapt the airbag deployment or safety belt pretensioner activation

based upon safety belt usage.

The Personal Safety System provides the most benefit to belted

occupants. The system monitors and tailors the air bag

deployment based upon safety belt usage. Failure to properly wear

your safety belt will increase your risk of injury.

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

131

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 335 336

Pas de commentaire

Ford 2006 F-150 v.3 Manuel d'utilisateur Page 131