Ford 2006 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 294)

Fuel Filler Cap

Your fuel tank filler cap has an indexed design with a 1/4 turn on/off

feature.

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the filler cap counterclockwise 1/4 of a turn until it

stops.

3. Pull to remove the cap from the fuel filler pipe.

4. To install the cap, align the tabs on the cap with the notches on the

filler pipe.

5. Turn the filler cap clockwise 1/4 of a turn until it clicks at least once.

If the digital display, if equipped,

reads “CHECK FUEL CAP” and

stays on after you start the engine,

the fuel filler cap may not be

properly installed. Turn off the

engine, remove the fuel filler cap, align the cap properly and reinstall it.

If you must replace the fuel filler cap, replace it with a fuel filler

cap that is designed for your vehicle. The customer warranty may

be void for any damage to the fuel tank or fuel system if the

correct genuine Ford or Motorcraft fuel filler cap is not used.

The fuel system may be under pressure. If the fuel filler cap is

venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may

spray out and injure you or others.

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

294

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 335 336

Pas de commentaire

Ford 2006 F-150 v.3 Manuel d'utilisateur Page 294