Ford 2006 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 221)

• 4X4 LOW – Momentarily

illuminates when the engine is

started. Illuminates when 4L is

selected.

Using a manual 4WD system (if equipped)

2H (2WD High) – Power to the rear wheels only; used for street and

highway driving. Provides optimal smoothness and fuel economy at high

speeds.

4H (4WD High) – Used for extra traction such as in snow or icy roads

or in off-road situations. Not intended for use on dry pavement.

N (Neutral) – No power to either front or rear wheels.

4L (4WD Low)– Uses extra gearing to provide maximum power to all

four wheels at reduced speeds. Intended only for off-road applications

such as deep sand, steep grades or pulling heavy objects. 4L (4WD Low)

will not engage while the vehicle is moving above 3 mph (5 km/h); this is

normal and should be no reason for concern. Refer to Shifting to/from

4L (4WD Low) for proper operation.

Shifting between 2H (2WD high) and 4H (4WD high)

• Move the transfer case lever between 2H (2WD High) and 4H (4WD

High) at a stop or any forward speed up to 55 mph (88 km/h).

Note: Do not perform this operation at speeds above 45 mph (72 km/h)

if the outside temperature is below 32°F (0°C).

Note: Do not perform this operation if the rear wheels are slipping.

Note: Some noise may be heard as the system shifts or engages; this is

normal.

Shifting to/from 4L (4WD Low)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

4x4

LOW

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

221

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 335 336

Pas de commentaire

Ford 2006 F-150 v.2 Manuel d'utilisateur Page 221