Ford 2006 F-150 v.2 Manuel d'utilisateur télécharger pdf (Page 106)

Every two consecutive presses of the control after successfully

entering the configuration mode will change the enable/disable condition

of the feature.

5. Turn the ignition to the 1 (OFF/LOCK) position to exit programming.

Note: After exiting the driver configuration mode, the horn will chirp

once to indicate a feature has been activated/deactivated.

Autolock (if equipped)

The autolock feature is available on automatic transmission vehicles with

power locking. This feature will lock all the doors when:

• all the doors are closed,

• the ignition is in the 3 (ON) position,

• you shift into any gear putting the vehicle in motion, and

• the brake pedal is released and the vehicle attains a speed greater

than 5 mph (8 km/h).

The autolock feature repeats when:

• any door is opened then closed while the ignition is in the 3 (ON)

position, and

• the brake pedal is released and the vehicle attains a speed greater

than 5 mph (8 km/h).

Deactivating/activating autolock

There are four methods to enable/disable this feature: One is through

your authorized dealer, the second with a power door unlock/lock

sequence, the third with the keypad, and the fourth using the message

center (if equipped).

Before following the activation or deactivation procedures, unlock all

doors using the power door lock/unlock control and ensure all vehicle

doors are closed.

2006 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

106

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 335 336

Pas de commentaire

Ford 2006 F-150 v.2 Manuel d'utilisateur Page 106