Ford 2005 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 110)

Power door unlock/lock procedure

You must complete steps 1-5 within

30 seconds or the procedure will

have to be repeated. If the

procedure needs to be repeated,

you must wait 30 seconds.

1. Turn the ignition to the 3 (ON)

position.

2. Press the power door unlock

control three times.

3. Turn the ignition from the 3 (ON) to the 1 (OFF/LOCK) position.

4. Press the power door unlock control three times.

5. Turn the ignition back to the 3 (ON) position. The horn will chirp.

6. Press the unlock control, then press the lock control. The horn will

chirp once if autolock was deactivated or twice (one short and one long

chirp) if autolock was activated.

7. Turn the ignition to the 1 (OFF/LOCK) position. The horn will chirp

once to confirm the procedure is complete.

Keyless entry key pad procedure

1. Turn the ignition to the 1 (OFF/LOCK) position.

2. Close all the doors, the liftgate and liftgate window.

3. Enter 5–digit entry code

4. Press and hold the 7 • 8. While holding the 7 • 8pressthe3• 4.

5. Release the 3 • 4.

6. Release the 7 • 8.

The user should receive a horn chirp to indicate the system has been

disabled or a chirp followed by a honk to indicate the system has been

enabled.

Message center procedure

For information on activating/deactivating the autolock feature using the

vehicle’s message center (if equipped), refer to Message center

information in the Driver Controls chapter.

2005 Explorer (exp)

Owners Guide (post-2002-fmt)

USA_English (fus)

Locks and Security

110

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 319 320

Pas de commentaire

Ford 2005 Explorer v.2 Manuel d'utilisateur Page 110