Ford 2004 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 49)

Replacing front parking lamp/turn signal/sidemarker bulbs

1. Make sure the headlamp control

is in the OFF position and open the

hood.

2. At the top and inboard side of the

headlamp, loosen the three retaining

screws.

3. Once the three retaining screws

have been removed, disengage the

tab at the top center of the

headlamp assembly by lifting it up.

4. Slide the headlamp assembly

forward disconnecting the snap

attachment at the fender and

disconnect the electrical connector

from the bulb by pulling rearward.

5. Remove bulb socket from the

parking lamp assembly by turning it

counterclockwise and then pull the

bulb straight out.

Install the new bulb(s) in reverse order.

Replacing tail/brake/turn signal/backup lamp bulbs

1. Make sure the headlamp control

is in the OFF position.

2. Open the tailgate to expose the

lamp assembly screws and remove

the two screws from the tail lamp

assembly.

Lights

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 154 155

Pas de commentaire

Ford 2004 F-150 v.1 Manuel d'utilisateur Page 49