Ford 2004 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 152)

has blown or the vehicle’s brakelamps are not operating properly. Refer

to Fuses and relays in the Roadside emergencies chapter.

If the fuse is not blown, perform the following procedure:

1. Apply the parking brake, turn the ignition to OFF/LOCK, then remove

the key.

2. Locate the round access plug on

the underside of the steering

column cover.

3. Remove the access plug using a flat head screwdriver, then push the

override button using a flat head screwdriver, apply the brake pedal and

shift the transmission into N (Neutral).

4. Reinstall the access plug cover, start the vehicle and release the

parking brake.

Do not drive your vehicle until you verify that the brakelamps

are working.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the OFF/LOCK position

and remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your dealer or a qualified service technician.

Brake-shift interlock - floor-shift transmission

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the ON position unless brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in

the ON position and the brake pedal depressed, it is possible that a fuse

Driving

152

1 2 ... 147 148 149 150 151 152 153 154 155

Pas de commentaire

Ford 2004 F-150 v.1 Manuel d'utilisateur Page 152