Ford 2002 Windstar v.2 Manuel d'utilisateur télécharger pdf (Page 90)

If your vehicle slows down more than 16 km/h (10 mph) below your set

speed on an uphill, your speed control will disengage. This is normal.

Pressing RES will re-engage it.

Do not use the speed control in heavy traffic or on roads that

are winding, slippery, or unpaved.

To set a higher set speed

• Press and hold SET +. Release

the control when the desired

vehicle speed is reached or

• Press and release SET + to

operate the Tap-Up function.

Each press will increase the set

speed by 1.6 km/h (1 mph) or

• Accelerate with your accelerator pedal. When the desired vehicle

speed is reached, press and release SET +.

You can accelerate with the accelerator pedal at any time during speed

control usage. Releasing the accelerator pedal will return your vehicle to

the previously programmed set speed.

To set a lower set speed

• Press and hold CST −. Release

the control when the desired

speed is reached or

• Press and release CST − to

operate the Tap-Down function.

Each press will decrease the set

speed by 1.6 km/h (1 mph) or

• Depress the brake pedal. When

the desired vehicle speed is

reached, press SET +.

Driver Controls

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 287 288

Pas de commentaire

Ford 2002 Windstar v.2 Manuel d'utilisateur Page 90