Ford 2002 Windstar v.2 Manuel d'utilisateur télécharger pdf (Page 193)

• Refer to the instructions included with towing accessories for the

proper installation and adjustment specifications.

If your vehicle is equipped with the optional heavy duty trailer tow

wiring, it is pre-wired for trailer towing. An electrical connector is

provided under the instrument panel for installing a customer-supplied

electric brake controller. Another electrical connector is provided at the

hitch. This connector provides power to the trailer for taillamps, stop

and turn lamps, back up lamps, battery charge, electric brakes (when a

customer provided controller is installed) and ground. The kit included

with your vehicle provides you with adaptors to attach the brake

controller and convert the hitch connector for Class I trailer usage.

Engine

Maximum GCWR -

kg (lbs.)

Trailer weight range

(0 - maximum) - kg (lbs.)

Van

3.8L 3 175 (7 000) 0-907 (0-2 000)

Wagon

3.8L 3 175 (7 000) 0-907 (0-2 000)

3.8L with

Trailer Tow

Option

3 856 (8 500) 0-1 588 (0-3 500)

Do not exceed the maximum loads listed on the Safety Compliance

Certification label. For load specification terms found on the label, refer

to Vehicle loading in this chapter. Remember to figure in the tongue

load of your loaded trailer when figuring the total weight.

Towing trailers beyond the maximum recommended gross trailer

weight exceeds the limit of the vehicle and could result in

engine damage, transmission damage, structural damage, loss of control

and personal injury.

Preparing to tow

Use the proper equipment for towing a trailer, and make sure it is

properly attached to your vehicle. See your dealer or a reliable trailer

dealer if you require assistance.

Driving

193

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 287 288

Pas de commentaire

Ford 2002 Windstar v.2 Manuel d'utilisateur Page 193