Ford 2014 F-150 Raptor v.2 Manuel d'utilisateur télécharger pdf (Page 35)

WARNINGS

The belt and retractor must be

replaced if the safety belt assembly

automatic locking retractor feature

or any other safety belt function is not

operating properly when checked by an

authorized dealer. Failure to replace the

belt and retractor assembly could increase

the risk of injury in crashes.

All safety restraints in the vehicle are

combination lap and shoulder belts. The

driver safety belt has the first type of

locking mode, and the front outboard

passenger and rear seat safety belts have

both types of locking modes described as

follows:

Vehicle Sensitive Mode

This is the normal retractor mode, which

allows free shoulder belt length

adjustment to your movements and

locking in response to vehicle movement.

For example, if the driver brakes suddenly,

turns a corner sharply, or the vehicle

receives an impact of about 5 mph (8

km/h) or more, the combination safety

belts will lock to help reduce forward

movement of the driver and passengers.

In addition, the retractor is designed to lock

if the webbing is pulled out too quickly. If

this occurs, let the belt retract slightly and

pull webbing out again in a slow and

controlled manner.

Automatic Locking Mode

In this mode, the shoulder belt is

automatically pre-locked. The belt will still

retract to remove any slack in the shoulder

belt. The automatic locking mode is not

available on the driver safety belt.

When to Use the Automatic Locking

Mode

Use this mode any time you install a child

safety seat in a front outboard passenger

seating position in a Regular Cab,

SuperCab, SuperCrew or any rear seating

position of a SuperCab or SuperCrew. The

optional front seat's center safety belt has

a cinch mechanism. Children 12 years old

and under should be properly restrained in

a rear seat whenever possible. See Child

Safety (page 14).

How to Use the Automatic Locking

Mode

E142591

1. Buckle the combination lap and

shoulder belt.

2. Grasp the shoulder portion and pull

downward until you pull the entire belt

out.

Allow the belt to retract. As the belt

retracts, you will hear a clicking sound. This

indicates the safety belt is now in the

automatic locking mode.

How to Disengage the Automatic

Locking Mode

Unbuckle the combination lap and

shoulder belt and allow it to retract

completely to disengage the automatic

locking mode and activate the vehicle

sensitive (emergency) locking mode.

32

F150 (TF6) , enUSA

Safety Belts

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 469 470

Commentaires sur ces manuels

Pas de commentaire