Ford 2014 F-150 Raptor v.2 Manuel d'utilisateur télécharger pdf (Page 252)

E163757

3. Clean the area around the air tube to

air cover connection to prevent debris

from entering the system and then

loosen the bolt on the air tube clamp

so the clamp is no longer snug to the

air tube. It is not necessary to

completely remove the clamp.

4. Pull the air tube off from the air cleaner

housing.

E163758

5. Release the three clamps that secure

the cover to the air filter housing. Push

the air filter cover toward the center of

the vehicle and up slightly to release it.

6. Remove the air filter element from the

air filter housing.

7. Install a new air filter element.

E163759

8. Replace the air filter housing cover and

secure the clamps. Be careful not to

crimp the filter element edges between

the air filter housing and cover and

ensure that the tabs on the edge are

properly aligned into the slots.

9. Slip the air tube onto the air filter

housing and tighten the air-tube clamp

bolt snugly, but do not overtighten it.

E163760

10. Reconnect the mass air flow sensor

electrical connector to the outlet

tube. Make sure the locking tab on

the connector is in the “locked”

position (connector shown from

below for clarity).

249

F150 (TF6) , enUSA

Maintenance

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 469 470

Commentaires sur ces manuels

Pas de commentaire