Ford 2014 F-150 Raptor v.2 Manuel d'utilisateur télécharger pdf (Page 242)

Only use oils certified for gasoline engines

by the American Petroleum Institute (API).

An oil with this trademark symbol

conforms to the current engine and

emission system protection standards and

fuel economy requirements of the

International Lubricants Specification

Advisory Council (ILSAC), comprised of

U.S. and Japanese automobile

manufacturers.

1. Check the engine oil level.

2. If the engine oil level is not within the

normal range, add engine oil that

meets Ford specifications. See

Capacities and Specifications (page

295).

3. Remove the engine oil filler cap and

use a funnel to pour the engine oil into

the opening.

4. Recheck the engine oil level. Make sure

the oil level is not above the normal

operating range on the engine oil level

dipstick.

5. Install the engine oil level dipstick and

ensure it is fully seated.

6. Fully install the engine oil filler cap by

turning the filler cap clockwise until

three clicks are heard or until the cap

is fully seated.

TRANSFER CASE FLUID

CHECK

E170444

1. Clean the area around the filler plug.

2. Remove the filler plug.

3. Inspect the fluid level. The fluid level

should be within 0.40 in (10mm) from

the bottom of the hole.

4. Add fluid through the filler opening, fill

to the bottom of the opening.

Use only fluid that meets Ford

specifications. Refer to the See

Capacities and Specifications (page

295).

239

F150 (TF6) , enUSA

Maintenance

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 469 470

Commentaires sur ces manuels

Pas de commentaire