Ford 2014 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 147)

100

101

Note: the Genie transmitter will transmit for up to 30 seconds. If

HomeLink does not program within 30 seconds the Genie transmitter will

need to be pressed again. If the Genie transmitter LED displays green

and red, release the button until the LED turns off before pressing the

button again.

Once HomeLink has been programmed successfully, the Genie

transmitter must be changed out of program mode. To do this:

1. Press and hold the previously programmed Genie button on the

hand-held transmitter for 10 seconds. The indicator light will change

from red to red and green.

2. Press the same button twice to confirm the change. If done correctly

the LED will turn green.

Programming HomeLink to the Genie Intellicode garage door

opener motor

Note: You may need a ladder to access the garage door opener motor.

To program HomeLink to the garage

door opener motor:

1. Press and hold the PROGRAM

button on the garage door opener

motor until both blue LED’s turn on.

2. Release the PROGRAM button.

Only the smaller round LED should

be on.

3. Press and release the program

button. The larger purple LED will

flash

Note: The next two steps must be completed in 30 seconds.

4. Press and release the Genie Intellicode 2 hand-held transmitter’s

previously programmed button. Both indicator lights on the garage door

opener motor unit should now flash purple.

5. Press and hold the previously programmed button on the sun visor for

two seconds. Repeat this step up to 3 times until the garage door moves.

Programming is now complete.

146 Universal Garage Door Opener (If Equipped)

2014 05+ Mustang (197)

Owners Guide gf, 3rd Printing, January 2014

USA (fus)

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 462 463

Commentaires sur ces manuels

Pas de commentaire

Ford 2014 Mustang v.3 Manuel d'utilisateur Page 147

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2014 Mustang v.3