Ford 2014 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 215)

100

101

When the battery is disconnected or a new battery is installed, the

automatic transmission must relearn its shift strategy. As a result, the

transmission may exhibit a combination of firm and soft shifts. This

operation is considered normal and will not affect function or durability

of the transmission. Over time, the adaptive learning process will fully

update transmission operation.

Preparing Your Vehicle

Note: Use only a 12–volt supply to start your vehicle.

Note: Do not disconnect the battery of the disabled vehicle as this could

damage the vehicle’s electrical system.

1. Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving

parts.

2. Check all battery terminals. Remove the positive terminal cover (if

equipped) and any excessive corrosion before you attach the battery

cables. Ensure that vent caps are tight and level.

3. Turn the heater fan on in both vehicles to protect from any electrical

surges. Turn all other accessories off.

Connecting the Jumper Cables

WARNING: Do not connect the end of the second cable to the

negative (-) terminal of the battery to be jumped. A spark may

cause an explosion of the gases that surround the battery.

Note: Do not attach the negative (-) cable to fuel lines, engine rocker

covers, the intake manifold or electrical components as grounding points.

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

214 Roadside Emergencies

2014 05+ Mustang (197)

Owners Guide gf, 3rd Printing, January 2014

USA (fus)

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 462 463

Commentaires sur ces manuels

Pas de commentaire

Ford 2014 Mustang v.3 Manuel d'utilisateur Page 215

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2014 Mustang v.3