Ford 2011 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 304)

100

101

• 2.5L coolant bleed valve

• 3.0L coolant bleed valve

5. Open the coolant bleed valve on the back of the engine water outlet

for the 2.5L engine or in the thermostat housing for the 3.0L engine.

6. Fill the coolant reservoir slowly with the proper coolant mixture, to

within the COLD FILL RANGE or the FULL COLD level on the reservoir.

If you removed the radiator cap in an overflow system, fill the radiator

until the coolant is visible and radiator is almost full.

7. Close the bleed valve and reinstall the cap on the coolant reservoir.

Turn the cap until it is tightly installed to prevent coolant loss.

After any coolant has been added, check the coolant concentration (refer

to Checking engine coolant). If the concentration is not 50/50, drain

some coolant and adjust the concentration. It may take several drains

and additions to obtain a 50/50 coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

Maintenance and Specifications

304

2011 Fusion (fsn)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 373 374

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Fusion v.3 Manuel d'utilisateur Page 304

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Fusion v.3