Ford 2010 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 217)

• If the oil level is between the

MIN and MAX marks, the oil

level is acceptable. DO NOT

ADD OIL.

• If the oil level is below the MIN

mark, add enough engine oil to

raise the level within the MIN and

MAX range. Refer to Adding

engine oil in this chapter.

• Oil levels above MAX mark

may cause engine damage. If

the engine is overfilled, some oil

must be removed from the engine

by an authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until three clicks are heard or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

Maintenance and Specifications

217

2010 Transit Connect (tst)

Owners Guide (own2002), 2nd Printing

USA (fus)

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 258 259

Pas de commentaire

Ford 2010 Transit Connect v.2 Manuel d'utilisateur Page 217