Ford 2010 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 216)

CHANGING THE WIPER BLADES

1. Pull the wiper arm away from the

vehicle. Turn the blade at an angle

from the wiper arm. Press the lock

tab to release the blade and pull the

wiper blade down toward the

windshield to remove it from the

arm.

2. Attach the new wiper to the

wiper arm and press it into place

until a click is heard.

Replace wiper blades at least once per year for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the

windshield. Refer to Windows and wiper blades in the Cleaning

chapter.

To prolong the life of the wiper blades, it is highly recommended to

scrape off the ice on the windshield before turning on the wipers. The

layer of ice has many sharp edges and can damage the micro edge of the

wiper rubber element.

REAR WINDOW WIPER BLADES (IF EQUIPPED)

Refer to Changing the wiper blades in this section and follow the same

procedure given for checking and changing the wiper blades.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate

intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the

oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P

(Park)

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.

Maintenance and Specifications

216

2010 Transit Connect (tst)

Owners Guide (own2002), 2nd Printing

USA (fus)

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 258 259

Pas de commentaire

Ford 2010 Transit Connect v.2 Manuel d'utilisateur Page 216