Ford 2010 Edge v.3 Manuel d'utilisateur télécharger pdf (Page 92)

• Fixed code garage door openers were produced prior to 1996. Fixed

code uses the same coded signal every time. It is manually

programmed by setting DIP switches for a unique personal code.

If you do not know if your garage

door opener is a rolling code or

fixed code device, open your garage

door opener’s remote control battery

cover. If a panel of DIP switches is

present your garage door opener is

a fixed code device. If not, your

garage door opener is a rolling code

device.

Rolling code programming

Note: Programming the rolling code garage door opener involves

time-sensitive actions. Read the entire procedure prior to beginning so

you will know which actions are time-sensitive. If you do not follow the

time-sensitive actions, the device will time out and you will have to

repeat the procedure.

Note: Do not program the Car2U威 system with the vehicle in the garage.

Make sure that your key is on and engine off while programming the

transmitter.

1. Firmly press the two outer

Car2U威 system buttons for

1–2 seconds, then release.

206-12 T1

Driver Controls

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 325 326

Pas de commentaire

Ford 2010 Edge v.3 Manuel d'utilisateur Page 92