Ford 2010 Edge v.3 Manuel d'utilisateur télécharger pdf (Page 296)

Fuel filler cap

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the filler cap counterclockwise until it spins off.

3. Pull to remove the cap from the fuel filler pipe.

4. To install the cap, align the tabs on the cap with the notches on the

filler pipe.

5. Turn the filler cap clockwise until at least a few clicks are heard.

If the check fuel cap light

or a “check fuel cap” message comes on,

the fuel filler cap may not be properly installed. The light or message can

come on after several driving events after you’ve refueled your vehicle.

At the next opportunity, safely pull off of the road, remove the fuel filler

cap, align the cap properly and reinstall it. The check fuel cap

light

or “check fuel cap” message may not reset immediately; it may

take several driving cycles for the check fuel cap light or “check fuel

cap” message to turn off. A driving cycle consists of an engine start-up

(after four or more hours with the engine off) followed by city and

highway driving.

Continuing to drive with the check fuel cap light

or “check fuel cap”

message on may cause the service engine soon light to turn on as

well.

If you must replace the fuel filler cap, replace it with a fuel filler

cap that is designed for your vehicle. The customer warranty may

be void for any damage to the fuel tank or fuel system if the

correct genuine Ford, Motorcraft or other certified fuel filler cap

is not used.

WARNING: The fuel system may be under pressure. If the fuel

filler cap is venting vapor or if you hear a hissing sound, wait

until it stops before completely removing the fuel filler cap. Otherwise,

fuel may spray out and injure you or others.

Maintenance and Specifications

296

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 325 326

Pas de commentaire

Ford 2010 Edge v.3 Manuel d'utilisateur Page 296