Ford 2010 Edge v.3 Manuel d'utilisateur télécharger pdf (Page 289)

• Refer to scheduled maintenance information for service interval

schedules.

If the engine coolant has not been checked at the recommended interval,

the engine coolant reservoir may become low or empty. If the reservoir is

low or empty, add engine coolant to the reservoir. Refer to Adding

engine coolant in this chapter.

Note: Automotive fluids are not interchangeable; do not use engine

coolant/antifreeze or windshield washer fluid outside of its specified

function and vehicle location.

Adding engine coolant

When adding coolant, make sure it is a 50/50 mixture of engine coolant

and distilled water. Add the mixture to the coolant reservoir, when the

engine is cool, until the appropriate fill level is obtained. If coolant is

filled to the COLD FILL RANGE or FULL COLD level when the engine is

not cool, the system will remain underfilled.

WARNING: Do not add engine coolant when the engine is hot.

Steam and scalding liquids released from a hot cooling system

can burn you badly. Also, you can be burned if you spill coolant on hot

engine parts.

WARNING: Do not put engine coolant in the windshield washer

fluid container. If sprayed on the windshield, engine coolant

could make it difficult to see through the windshield.

• DO NOT MIX different colors or types of coolant in your vehicle.

Make sure the correct coolant is used. DO NOT MIX recycled coolant

and new (unused) coolant together in the vehicle. Mixing of engine

coolants may harm your engine’s cooling system. The use of an

improper coolant may harm engine and cooling system components

and may void the warranty. Refer to Maintenance product

specifications and capacities in this chapter.

Note: Do not use stop leak pellets or cooling system sealants/additives

as they can cause damage to the engine cooling and/or heating systems.

This damage would not be covered under your vehicle’s warranty.

• A large amount of water without engine coolant may be added, in case

of emergency, to reach a vehicle service location. In this instance, the

cooling system must be drained and refilled with a 50/50 mixture of

engine coolant and distilled water as soon as possible. Water alone

(without engine coolant) can cause engine damage from corrosion,

overheating or freezing.

Maintenance and Specifications

289

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 325 326

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Edge v.3 Manuel d'utilisateur Page 289

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Edge v.3