Ford 2010 Edge v.3 Manuel d'utilisateur télécharger pdf (Page 112)

Press to automatically move the driver seat, power mirrors and

adjustable pedals to the desired memory position. The mirrors will move

to the programmed position and the seat will move to the easy entry

position. The seat will move to the final position when the key is in the

ignition (if easy entry feature is enabled).

Programming the memory feature to the transmitter

To activate this feature:

1. Move the driver seat and power mirrors to the desired positions using

the associated controls.

2. Press and hold control button 1

for five seconds. A tone will be

heard after two seconds confirming

memory position has been set.

Continue to hold until a second tone

is heard after five seconds.

3. Within three seconds press

the

4. A tone will be heard when the

transmitter programming is

complete.

5. Press the

6. Repeat this procedure for memory 2 and another transmitter if

desired.

Deprogramming the memory feature from the transmitter

To deactivate this feature:

1. Press and hold either the 1 or 2 control on the driver’s door for five

seconds. A tone will be heard after 1

⁄

seconds when the memory store

is done, continue to hold until a second tone is heard after five seconds.

2. Within three seconds press the

3. A tone will be heard when the deactivation is complete.

4. Repeat this procedure for another transmitter if desired.

Replacing the battery

The integrated keyhead transmitter uses one coin type three-volt lithium

battery CR2032 or equivalent.

Locks and Security

112

2010 Edge (edg)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 325 326

Pas de commentaire

Ford 2010 Edge v.3 Manuel d'utilisateur Page 112