Ford 2008 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 159)

MANUAL TRANSMISSION OPERATION (IF EQUIPPED)

Using the clutch

The manual transmission has a starter interlock that prevents cranking

the engine unless the clutch pedal is fully depressed.

To start the vehicle:

1. Make sure the parking brake is fully set.

2. Press the clutch pedal to the floor, then put the gearshift lever in the

neutral position.

3. Start the engine.

4. Press the brake pedal and move the gearshift lever to the desired

gear; 1 (First) or R (Reverse).

5. Release the parking brake, then slowly release the clutch pedal while

slowly pressing on the accelerator.

During each shift, the clutch pedal must be fully depressed to the floor.

Make sure the floor mat is properly positioned so it doesn’t interfere with

the full extension of the clutch pedal.

Failure to fully depress the clutch pedal to the floor may cause

increased shift efforts, prematurely wear transmission

components or damage the transmission.

Do not drive with your foot resting on the clutch pedal or use the

clutch pedal to hold your vehicle at a standstill while waiting on a

hill. These actions will reduce the life of the clutch.

2008 Ranger (ran)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

159

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 271 272

Pas de commentaire

Ford 2008 Ranger v.1 Manuel d'utilisateur Page 159