Ford 2008 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 66)

5. Repeatedly press until your zone number is shown in the mirror

display, then release.

6. The display will show all segments, then return to normal compass

mode within ten seconds.

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and

high voltage lines.

1. Start the vehicle.

2. Press and hold the control until “C” appears in the mirror display.

3. Drive the vehicle slowly (less than 3 mph [5 km/h]) in circles until the

display reads a direction.

4. The compass is now calibrated.

EXTERIOR MIRRORS

Power side view mirrors

To adjust your mirrors:

1. Rotate the control clockwise to

adjust the right mirror and rotate

the control counterclockwise to

adjust the left mirror.

2. Move the control in the direction

you wish to tilt the mirror.

3. Return to the center position to lock mirrors in place.

SPEED CONTROL

With speed control set, you can maintain a set speed without keeping

your foot on the accelerator pedal.

Do not use the speed control in heavy traffic or on roads that

are winding, slippery or unpaved.

2008 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 287 288

Pas de commentaire

Ford 2008 Mustang v.2 Manuel d'utilisateur Page 66