Ford 2008 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 204)

4. Put the jack in the jack notch

next to the tire you are changing.

Turn the jack handle clockwise until

the wheel is completely off the

ground.

Never use the rear differential

as a jacking point.

To lessen the risk of

personal injury, do not put

any part of your body under the

vehicle while changing a tire. Do

not start the engine when your

vehicle is on the jack. The jack is

only meant for changing the tire.

5. Remove the lug nuts with the lug wrench.

6. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall lug nuts until the wheel is snug against the hub.

Do not fully tighten the lug nuts until the wheel has been lowered.

If you are using the temporary tire, the lug nut washers will not appear

to be flush with the rim. This is normal only when using the temporary

spare tire.

7. Lower the wheel by turning the jack handle counterclockwise.

8. Remove the jack and fully tighten

the lug nuts in the order shown.

Refer to Wheel lug nut torque

specifications later in this chapter

for the proper lug nut torque

specification.

9. Put flat tire, wheel ornament (if

equipped), jack and lug wrench

away. Make sure the jack is fastened

so it does not rattle when you drive.

10. Unblock the wheel.

2008 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

204

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 287 288

Pas de commentaire

Ford 2008 Mustang v.2 Manuel d'utilisateur Page 204