Ford 2008 Mustang v.2 Manuel d'utilisateur télécharger pdf (Page 183)

AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED)

Brake-shift interlock

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the ON position unless the brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in

the ON position and the brake pedal depressed:

1. Apply the parking brake, turn ignition key to LOCK, then remove the

key.

2. Using a flat head screwdriver, remove the plastic cover.

3. Insert the ignition key and push it

straight down to release the

interlock.

4. Apply the parking brake, then shift to N (Neutral).

5. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,

it is possible that a fuse has blown or the vehicle’s brakelamps are not

operating properly. Refer to Fuses and relays in the Roadside

Emergencies chapter.

Do not drive your vehicle until you verify that the brakelamps

are working.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the LOCK position and

remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer.

2008 05+ Mustang (197)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

183

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 287 288

Pas de commentaire

Ford 2008 Mustang v.2 Manuel d'utilisateur Page 183