Ford 2007 Freestyle v.2 Manuel d'utilisateur télécharger pdf (Page 270)

100

101

8. Add coolant/water mixture

through the thermostat housing

opening until full at housing

opening.

9. Install the thermostat housing

bleed plug. Install metal pin by

pushing into the slot.

After any coolant has been added, check the coolant concentration, refer

to the Checking engine coolant section. If the concentration is not

50/50 (protection to –34° F [–36° C]), drain some coolant and adjust the

concentration. It may take several drains and additions to obtain a 50/50

coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

2007 Freestyle (219)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

270

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 303 304

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Freestyle v.2 Manuel d'utilisateur Page 270

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Freestyle v.2