Ford 2007 Taurus Manuel d'utilisateur

Introduction 4Instrument Cluster 10Warning lights and chimes 10Gauges 13Entertainment Systems 15AM/FM stereo cassette 15AM/FM stereo with CD 18CD chan

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A wa

How do the airbag supplemental restraints work?The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice

The front passenger sensing system works with sensors that are part ofthe front passenger’s seat and safety belt. The sensors are designed todetect th

• When the front passenger sensing system disables (will not inflate)the front passenger frontal airbag, the indicator lamp will illuminateand stay li

After all occupants have adjusted their seats and put on safety belts, it’svery important that they continue to sit properly. A properly seatedoccupan

• Objects placed on the occupant’s lap• Cargo interference with the seat• Other passengers pushing or pulling on the seat• Rear passenger feet and kne

• If the airbag readiness lamp remains illuminated, this may or may/notbe a problem due to the front passenger sensing system.DO NOT attempt to repair

Seat-mounted side airbag system (if equipped)Do not place objects or mount equipment on or near the airbagcover on the side of the seatbacks of the fr

The side airbags are fitted on the outboard side of the seatbacks of thefront seats. In certain lateral collisions, the airbag on the side affected by

Important child restraint precautionsYou are required by law to use safety restraints for children in the U.S.and Canada. If small children (generally

Child booster seatsChildren outgrow a typical convertible or toddler seat when they weigh40 lb. (18 kg) and are around 4 years of age. Although the la

Brake system warning light: Toconfirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the ON

Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are backless.If your backless booster seat has aremovable shi

Children and booster seats vary widely in size and shape. Choose abooster that keeps the lap belt low and snug across the hips, never upacross the sto

Never use pillows, books, or towels to boost a child. They canslide around and increase the likelihood of injury or death in acollision.SAFETY SEATS F

and anchors, refer to Attaching safety seats with tether straps in thischapter. For more information of LATCH anchors refer to Attachingsafety seats w

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out and a

Installing child safety seats in the center lap belt seating position1. Lengthen the lap belt. To lengthen the belt, hold the tongue so that itsbottom

1. Position the child safety seat on the seat cushion.2. Route the child safety seat tether strap over the back of the seat.For vehicles with adjustab

Attaching safety seats with LATCH (Lower Anchors and Tethers forChildren) attachments for child seat anchorsSome child safety seats have two rigid or

Attach LATCH lower attachments of the child seat only to theanchors shown.If you install a child seat with rigid LATCH attachments, do not tightenthe

Engine oil pressure: Illuminateswhen the oil pressure falls below thenormal range, refer to Engine oil inthe Maintenance andSpecifications chapter.Tra

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o

Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr

gauges may be inaccurate. Ford Motor Company recommends the use ofa digital or dial-type tire pressure gauge rather than a stick-type tirepressure gau

To check the pressure in your tire(s):1. Make sure the tires are cool, meaning they are not hot from drivingeven a mile.Note: If you have to drive a d

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

This begins with the letters “DOT” and indicates that the tire meets allfederal standards. The next two numbers or letters are the plant codedesignati

Do not spin the wheels at over 35 mph (56 km/h). The tires mayfail and injure a passenger or bystander.Highway hazardsNo matter how carefully you driv

• Front Wheel Drive (FWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can be corrected by rotating the tires.Note: If your tir

Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (

GAUGESSpeedometer: Indicates thecurrent vehicle speed.Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtempera

Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/

12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

SNOW TIRES AND CHAINSSnow tires must be the same size and grade as the tires youcurrently have on your vehicle.The tires on your vehicle have all weat

Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your authorized dealer plus any aftermarketequipment.Payload – is th

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S

Exceeding the Safety Compliance Certification Label vehicleweight rating limits could result in substandard vehicle handlingor performance, engine, tr

Exceeding any vehicle weight rating limitation could result inserious damage to the vehicle and/or personal injury.Steps for determining the correct l

Tachometer: Indicates the enginespeed in revolutions per minute.Driving with your tachometerpointer continuously at the top ofthe scale may damage the

transport the cement to your home? If you and your friend each weigh220 lb. (99 kg), the calculation would be: 1400 – (2 x 220) – (12 x100) = 1400 – 4

Towing trailers beyond the maximum recommended gross trailerweight exceeds the limit of the vehicle and could result inengine damage, transaxle damage

Trailer lampsTrailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working.

RECREATIONAL TOWINGFollow these guidelines for your specific powertrain combination to towyour vehicle with all four wheels on the ground (such as beh

STARTINGPositions of the ignition1. ACCESSORY, allows the electricalaccessories such as the radio tooperate while the engine is notrunning.2. LOCK, lo

Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,

• Make sure the parking brake isset.• Make sure the gearshift is in P(Park).• Turn the key to 4 (ON) withoutturning the key to 5 (START).Some warning

Starting the engine1. Turn the key to 4 (ON) withoutturning the key to 5(START).2. Turn the key to 5 (START), thenrelease the key as soon as theengine

If you smell exhaust fumes inside your vehicle, have your dealerinspect your vehicle immediately. Do not drive if you smellexhaust fumes.Important ven

Refer to Brake system warninglight in the Instrument Clusterchapter for information on the brakesystem warning light.Four-wheel anti-lock brake system

AUDIO SYSTEMSAM/FM stereo cassette/MACH姞 AUDIO SYSTEM with AM/FM stereocassette (if equipped)1. Tape: Insert the cassette with theopening to the right

Even when the ABS is disabled,normal braking is still effective. (Ifyour BRAKE warning lampilluminates with the parking brakereleased, have your brake

During Traction Control娂 operation,the traction control active light willilluminate, you may hear an electricmotor type of sound coming fromthe engine

• Some noise is normal during operation. If the noise is excessive, checkfor low power steering pump fluid level before seeking service by yourauthori

If it is necessary to use the above procedure to move the gearshift lever,it is possible that a fuse has blown or the vehicle’s brakelamps are notoper

Hold the brake pedal down while you move the gearshift leverfrom P (Park) to another position. If you do not hold the brakepedal down, your vehicle ma

• Depress the brake pedal• Move the gearshift lever into the desired gearTo put your vehicle in P (Park):• Come to a complete stop• Move the gearshift

If your vehicle gets stuck in mud or snowIf your vehicle gets stuck in mud or snow, it may be rocked out byshifting between forward and reverse gears,

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Canadian customers refer to your Owner Information Guide forinformation on:• coverage period• exact fuel amounts• towing of your disabled vehicle• eme

HAZARD FLASHERThe hazard flasher is located on thesteering column, just behind thesteering wheel. The hazard flasherswill operate when the ignition is

5. Treble: Press / todecrease/increase the treble output.6. Balance: Press/ to shiftsound to the left/right speakers.7. Fade: Press/ to shiftsound to

3. If no fuel leak is apparent, reset the fuel pump shut-off switch bypushing down on the reset button.4. Turn the ignition to the ON position. Pause

COLORFuseratingMinifusesStandardfusesMaxifusesCartridgeMaxifusesFuse linkcartridge50A — — Red Red Red60A — — Blue — Yellow70A — — Tan — Brown80A — — N

Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription7 20A Rear defrost relay coil feed8 40A Blower motor9 — Rear defrost relay1

Fuse/relaylocationFuse ampratingPassenger compartment fuse paneldescription28 15A Turn signals, Back-up lamps29 20A Cigar lighter30 10A Courtesy light

Power distribution boxThe power distribution box islocated in the engine compartment.The power distribution box containshigh-current fuses that protec

The high-current fuses are coded as follows.Fuse/relaylocationFuse ampratingPower distribution boxdescription1 60A** Fuse junction panel2 30A** Powert

Fuse/relaylocationFuse ampratingPower distribution boxdescription28 15A* HEGO sensor, Transmission shiftsolenoid, A/C clutch relay,Canister vent29 — W

A dissimilar spare tire/wheel is defined as a spare tire and/or wheel thatis different in brand, size or appearance from the road tires and wheelsand

• Use snow chains on the end of the vehicle with the dissimilar sparetire/wheelThe usage of a full-size dissimilar spare tire/wheel can lead toimpairm

2. Place gearshift lever in P (Park),turn engine OFF, block thediagonally opposite wheel, thenremove the spare tire, jack and lugwrench.• These are lo

16. Tune: Works in radio mode orCD mode. Press/ to changefrequency down/up or previous/nextdisc.17. Cassette door: Insert acassette into the cassette

5. Loosen each wheel lug nutone-half turn counterclockwise butdo not remove them until the wheelis raised off the ground.6. Put the jack in the jack n

11. Return the flat tire, jack and lugwrench to their proper storagelocations. Make sure the jack isfastened so it does not rattle whenyou drive.12. U

JUMP STARTINGThe gases around the battery can explode if exposed to flames,sparks, or lit cigarettes. An explosion could result in injury orvehicle da

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable. Make th

Jump starting1. Start the engine of the booster vehicle and run the engine atmoderately increased speed.2. Start the engine of the disabled vehicle.3.

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized dealer for warrantyrepairs. While any authorized dealer handling

In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo

Audio System with AM/FM Stereo/Single CD Player (if equipped)1. Clock: To set the hour, press andhold the H control. When thedesired hour appears, rel

In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.Experience has sh

authorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of Canada participates in an impartialthird party

GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADABefore exporting your vehicle to a foreign country, contact theappropriate foreign embassy or consulate.

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is

• Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, sid

• Spray Motorcraft Engine Shampoo and Degreaser (ZC-20) on all partsthat require cleaning and pressure rinse clean.• Cover the highlighted areas to pr

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol orMotorcraft Premium Windshield Washer Concentrate (ZC-32–A),available from your au

• Remove light stains and soil with Motorcraft Professional StrengthCarpet & Upholstery Cleaner (ZC-54).• If grease or tar is present on the mater

6. Scan: Press to hear a briefsampling of all listenable radiostations or CD tracks. Press again tostop.7. CD: Press to play a CD. Pressagain to toggl

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide sc

OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel.2. Go to the front of the vehicle a

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.0L V6 Vulcan engine1. Automatic transmission fluid dipstick2. Brake fluid reservoir3. Air filter ass

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

CHANGING THE WIPER BLADES1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the lockpin manually to releas

• 3.0L Vulcan engine6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.• If the oil level is between the two holes or betwee

7. Put the indicator back in and ensure it is fully seated.Adding engine oil1. Check the engine oil. For instructions, refer to Checking the engineoil

Do not use supplemental engine oil additives, cleaners or other enginetreatments. They are unnecessary and could lead to engine damage thatis not cove

When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a

Seating and Safety Restraints 77Seating 77Safety restraints 81Airbags 97Child restraints 107Tires, Wheels and Loading 120Tire Information 120Tire Infl

16. EJ (Eject): Press to eject a CD.17. AM/FM: Press to choose afrequency band (AM/FM1/FM2).CD changer (if equipped)Your CD changer is either located

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur

remove the coolant pressure relief cap on the radiator of a vehicle withan overflow system, follow these steps to add engine coolant.To reduce the ris

Used engine coolant should be disposed of in an appropriatemanner. Follow your community’s regulations and standards for recyclingand disposing of aut

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELSImportant safety precautionsDo not overfill the fuel tank. The pressure in an overfilled tankmay cause leak

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek med

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container:• Place approved fuel container on the gr

If you do not use the proper fuel filler cap, excessive vacuum inthe fuel tank may damage the fuel system or cause the fuel capto disengage in a colli

Do not be concerned if your engine sometimes knocks lightly. However, ifit knocks heavily under most driving conditions while you are using fuelwith t

5. Line up the CD with the grooveof the disc holder. Ensure that thelabel on the CD faces downwards.6. Press the disc holder until it lockssecurely in

Replace the fuel filter with an authorized Motorcraft part. Thecustomer warranty may be void for any damage to the fuel systemif an authorized Motorcr

• Have the vehicle loading and distribution the same every time.Your results will be most accurate if your filling method is consistent.Calculating fu

• Revving the engine before turning it off may reduce fuel economy.• Using the air conditioner or defroster may reduce fuel economy.• You may want to

• Close windows for high speed driving.EPA window stickerEvery new vehicle should have the EPA window sticker. Contact yourauthorized dealer if the wi

Exhaust leaks may result in entry of harmful and potentiallylethal fumes into the passenger compartment.Do not make any unauthorized changes to your v

Readiness for Inspection/Maintenance (I/M) testingIn some localities, it may be a legal requirement to pass an I/M test ofthe on-board diagnostics sys

4. Check the fluid level on thedipstick. It should be between thearrows in the FULL HOT range. Donot add fluid if the level is withinthis range.5. If

1. Drive the vehicle 20 miles (30 km) or until it reaches normal operatingtemperature.2. Park the vehicle on a level surface and engage the parking br

Adjusting automatic transmission fluid levelsBefore adding any fluid, make sure the correct type is used. The type offluid used is normally indicated

Replace the PCV valve with one that meets Ford material anddesign specifications for your vehicle, such as a Motorcraft orequivalent replacement part.

• Remove loose labels before inserting tapes.• Allow tapes which have been subjected to extreme heat, humidity orcold to reach a moderate temperature

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItems CapacityFord Part Name orequivalentFord Part Number /Ford SpecificationBrake fluidBetween MAX a

Items CapacityFord Part Name orequivalentFord Part Number /Ford SpecificationPower steering fluidFill to line ondipstickMotorcraft MERCON威ATFXT-2-QDX

ENGINE DATAEngine 3.0L V6 Vulcanengine3.0L FFV V6 VulcanengineCubic inches 182 182Required fuel 87 octane 87 octane or Ethanol(E 85)Firing order 1-4-2

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

Peace of mindRemote startVehicle security systemsWheel locksFor maximum vehicle performance, keep the following information inmind when adding accesso

AAccessory delay ...44Air cleaner filter ...218Air conditioning ...25Airbag suppleme

Climate control (see Airconditioning or Heating) ...25Clock adjustAM/FM/Cassette ...15AM/FM/CD ...

choosing the right fuel ...208comparisons with EPA fueleconomy estimates ...213detergent in fuel ...209filling

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Passenger air

headlamps, flash to pass ...30instrument panel, dimming ...30interior lamps ...32–33, 35replacing bulbs ...

for children ...107–108lap belt ...90Occupant ClassificationSensor ...

Washer fluid...194Water, Driving through...156Windowspower...43Windshield w

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity buildup

AUTOMATIC TEMPERATURE CONTROL SYSTEM (IF EQUIPPED)1. OFF: Outside air is shut out andthe climate control system is turnedoff.2. A/C: Press to activate

6. AUTO: Press to engage fullautomatic operation, and select thedesired temperature using thetemperature control. The system will automatically determ

• To reduce humidity build up inside the vehicle, do not drive with theairflow selector in the OFF position, or with(recirculated air)engaged without

The defroster turns off automatically after 10 minutes or when theignition is turned to the OFF position. To manually turn off the defrosterbefore 10

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola

Maintenance and Specifications 191Engine compartment 193Engine oil 195Battery 198Engine Coolant 200Fuel information 205Part numbers 218Maintenance pro

Flash to passPull toward you slightly to activateand release to deactivate.Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a redu

AIMING THE HEADLAMPSThe headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident the alignment of yo

To see a clearer light pattern foradjusting, you may want to blockthe light from one headlamp whileadjusting the other.5. Locate the vertical adjuster

The dome lamp will illuminate whenever any door is opened, and thelamp will remain on for 25 seconds after the door is shut. If any otherdoor has been

BULB REPLACEMENTHeadlamp CondensationThe headlamps are vented to equalize pressure. When moist air entersthe headlamp(s) through the vents, there is a

Replacing the interior bulbsCheck the operation of all bulbs frequently.Replacing exterior bulbsCheck the operation of all the bulbs frequently.Replac

5. Disconnect the electricalconnector from the bulb by pullingrearward.6. Remove the bulb retaining ring byrotating it counterclockwise.7. Remove the

2. Install the bulb retaining ring over the plastic base and lock the ringby rotating clockwise until it snaps into place.3. Connect the electrical co

5. Carefully pull bulb straight out ofthe socket and push in the newbulb.6. Install the bulb socket into thelamp assembly by rotating itclockwise.7. C

To replace the LED module:1. Remove the two outboardgrommets from the inside of thedecklid.2. On the inside of the decklid,remove the three nuts that

CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth

Replacing tail/brake/turn signal/backup lamp bulbsThe tail lamp, brake lamp, turnsignal lamp and backup lamp bulbsare located in the same portion ofth

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp.CENTER CONSOLEYour vehicle may be equipped with a variety

Do not use the power point for operating the cigarette lighter element (ifequipped).To prevent the fuse from being blown, do not use the power point(s

One touch downAllows the driver’s window to openfully without holding the controldown. Press completely down onAUTO and release quickly. Pressagain to

EXTERIOR MIRRORSPower side view mirrorsTo adjust your mirrors:1. Select L to adjust the left mirroror R to adjust the right mirror.2. Move the control

Setting speed controlThe controls for using your speedcontrol are located on the steeringwheel for your convenience.1. Press the ON control and releas

Resuming a set speedPress the RES (resume) control andrelease it. This will automaticallyreturn the vehicle to the previouslyset speed. The RES contro

• Depress the brake pedal until thedesired vehicle speed is reached,press the SET ACC control.Turning off speed controlThere are two ways to turn off

Before operating the moonroof you should verify that it is free ofobstructions and ensure that children and/or pets are not in theproximity of moon ro

Warning symbols on your vehicleWhen you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempti

ProgrammingDo not program HomeLink威 with the vehicle parked in the garage.Note: Your vehicle may require the ignition switch to be turned to theACC po

Note: If the indicator light blinks rapidly for two seconds and then turnsto a continuous red, proceed with Steps 6 through 8 to completeprogramming o

Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet

MESSAGE CENTERWith the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle informationthrough

The DTE function will display LOW FUEL LEVEL and sound a tone forone second when you have approximately 25 miles (40 km) to empty. Ifyou RESET this wa

Trip elapsed drive timeSelect this function from the INFOmenu to display a timer.To operate the Trip Elapsed DriveTime perform the following:1. Press

Most geographic areas (zones) have a magnetic north compass point thatvaries slightly from the northerly direction on maps. This variation is fourdegr

6. Release the RESET control, thenslowly press RESET down again.7. Press the SET control repeatedlyuntil the correct zone setting foryour geographic l

2. Pressing the RESET controlcycles the message center througheach of the language choices.3. Press and hold the RESETcontrol to set the language choi

System warningsSystem warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems.In the event of a multiple warning si

Please read the section Supplemental restraint system (SRS)in the Seating and Safety Restraints chapter. Failure to followthe specific warnings and in

DRIVER’S DOOR AJAR. Displayed when the driver’s door is notcompletely closed.PASSENGER DOOR AJAR. Displayed when the passenger side door isnot complet

when the engine is idling at a low speed, turn off as many of theelectrical loads as possible. If the warning stays on or comes on when theengine is o

POSITIVE RETENTION FLOOR MATDo not install additional floor mats on top of the factory installedfloor mats as they may interfere with the accelerator

KEYSThe key operates all locks on your vehicle. In case of loss, replacementkeys are available from your dealer.You should always carry a second key w

1. Turn the ignition to the 4 (ON)position, then press the power doorUNLOCK control 3 times.2. Turn the ignition to the 3 (OFF)position, then press th

INTERIOR LUGGAGE COMPARTMENT RELEASEYour vehicle is equipped with a mechanical interior luggage compartmentrelease handle that provides a means of esc

REMOTE ENTRY SYSTEM (IF EQUIPPED)This device complies with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the fo

The inside lights will not turn off if:• they have been turned on using the dimmer control or• any door is open.The battery saver feature will turn of

To replace the battery:1. Twist a thin coin between the twohalves of the remote entrytransmitter near the key ring. DONOT TAKE THE RUBBER COVERAND CIR

To reprogram the remote entrytransmitters:1. Ensure the vehicle iselectronically unlocked.2. Put the key in the ignition.3. Turn the key from the 2 (L

Cell phone useThe use of Mobile Communications Equipment has become increasinglyimportant in the conduct of business and personal affairs. However,dri

• any door is open.The battery saver will shut off the interior lamps 10 minutes after theignition has been turned to the 3 (OFF) position.Perimeter l

Note: The puddle lamps (if equipped) cannot be deactivated; performingthis procedure will only deactivate the head, park and tail lamps.KEYLESS ENTRY

2. Press and release the 1 • 2 within five seconds of completing Step 1.3. Press and hold the 1 • 2 for two seconds to erase the customerprogrammed co

engine. If a problem occurs, turn the ignition off, remove all objects onthe key chain away from the coded key and restart the engine.Anti-theft indic

Programming spare keysYou can program your own coded keys to your vehicle. Please read andunderstand the entire procedure before you begin.Tips:• A ma

If the key has been successfully programmed it will start the vehicle’sengine and the theft indicator light will illuminate for three seconds andthen

Disarming the systemYou can disarm the system by any of the following actions:• Unlock the doors by pressing thecontrol on your remote entrytransmitte

SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a

To lower the head restraint:• Push the release control.• Push down on the head restraint.Using the manual lumbar support (if equipped)The lumbar contr

Pull lever up to adjust seatback.Before returning theseatback to its originalposition, make sure that cargo orany objects are not trappedbehind the se

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

To reduce the risk of possible serious injury: Do not hang objectsoff seat back or stow objects in the seatback map pocket (ifequipped) when a child i

REAR SEATS2nd seat/split-folding rear seat (if equipped)Pull the loop forward to release theseatback and then fold the seatbackdown.When raising the s

• Driver’s seat position sensor.• Front crash severity sensor.• Front passenger sensing system• “Passenger airbag off” or “pass airbag off” indicator

allows your Personal Safety System娂 to distinguish between differentlevels of crash severity and modify the deployment strategy of thedual-stage airba

will light and stay lit to remind you that the front passenger frontalairbag is off. See Front passenger sensing system in the airbags sectionof this

• A series of five beeps will be heard. The tone pattern will repeatperiodically until the problem and warning light are repaired.If any of these thin

Always transport children 12 years old and under in the backseat and always properly use appropriate child restraints.Combination lap and shoulder bel

Vehicle sensitive modeThis is the normal retractor mode, which allows free shoulder belt lengthadjustment to your movements and locking in response to

How to disengage the automatic locking modeFord Motor Company recommends that all safety belt assembliesand attaching hardware should be inspected by

activated, the safety belt pretensioner for that seating position will beactivated if the safety belt is properly buckled.The driver and front outboar

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng

Position the safety belt height adjusters so that the belt restsacross the middle of your shoulder. Failure to adjust the safetybelt properly could re

Do not use extensions to change the fit of the shoulder beltacross the torso.Safety belt maintenanceInspect the safety belt systems periodically to ma

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the ONposition...The safety belt war

If... Then...The driver’s and frontpassenger’s safety belts arebuckled before the ignitionswitch is turned to the ONposition or less than 1-2minutes h

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

The driver and front passenger BeltMinder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The airbag supplemental restraint system (SRS) is designed to work inconjunction with the safety belts to he

Important supplemental restraint system precautionsAirbags DO NOT inflate slowly orgently and the risk of injury from adeploying airbag is greatest cl

Do not attempt to service, repair, or modify the airbagsupplemental restraint system (SRS) or its fuses. See yourauthorized dealer.The front passenger