Ford 2007 Focus v.4 Manuel d'utilisateur télécharger pdf (Page 42)

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screwdriver, remove two

screws and gently pull the lamp

assembly away from the vehicle.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.

Install in reverse order.

Replacing foglamp bulbs (if equipped)

1. Make sure the headlamp switch is

in the OFF position.

2. Remove the front splash shield

from the bumper.

3. Reach under the front fender, and

remove the bulb socket from the

foglamp by turning

counterclockwise.

4. Disconnect the electrical connector.

Install the new bulb in reverse order.

Replacing side marker bulbs

1. Make sure the headlamp control

is in the OFF position.

2. Remove the front splash shield

from the bumper.

3. Reach under the side of the

bumper, grasp the bulb socket and

turn it counterclockwise to remove

it.

4. Pull the bulb straight out.

Install in reverse order.

2007 Focus (foc)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 231 232

Pas de commentaire

Ford 2007 Focus v.4 Manuel d'utilisateur Page 42