Ford 2007 Focus v.4 Manuel d'utilisateur télécharger pdf (Page 190)

WINDSHIELD WASHER FLUID

Add fluid to fill the reservoir if the

level is low. In very cold weather, do

not fill the reservoir completely.

Only use a washer fluid that meets

Ford specification WSB-M8B16-A2.

Do not use any special washer fluid

such as windshield water repellent

type fluid or bug wash. They may

cause squeaking, chatter noise,

streaking and smearing. Refer to the

Maintenance product

specifications and capacities section in this chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

If you operate your vehicle in temperatures below 40° F (4.5°C),

use washer fluid with antifreeze protection. Failure to use

washer fluid with antifreeze protection in cold weather could result in

impaired windshield vision and increase the risk of injury or accident.

Note: Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling system

components.

CHANGING THE WIPER BLADES

1. Pull the wiper blade and arm

away from the glass. Turn the blade

at a right angle to the arm. Push the

lock tab (A) to release the blade

from the arm loop and pull the

blade down toward the windshield

to remove it from the arm.

2. Attach the new blade to the arm

loop and pull it into place until a

click is heard.

Replace wiper blades at least once per year for optimum performance.

2007 Focus (foc)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

190

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 231 232

Pas de commentaire

Ford 2007 Focus v.4 Manuel d'utilisateur Page 190