Ford 2007 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 117)

100

101

3. Locate the reset button on top of

the compass sensor mounted behind

the mirror.

4. Press and hold the reset button

on the compass module for

approximately 4 seconds until the

message center displays a selection

to change the current zone setting:

ZONE <XX> RESET = CHANGE

5. Press and release the RESET stem to scroll through until the correct

zone appears in the message center display.

6. The display will return to normal operation after 4 seconds. The zone

is now updated.

Compass calibration adjustment

Perform compass calibration in an open area free from steel structures

and high voltage lines. For optimum calibration, turn off all electrical

accessories (heater/air conditioning, wipers, etc.) and make sure all

vehicle doors are shut.

1. Start the vehicle.

2. Locate the reset button on the compass sensor mounted on the base

of mirror.

3. To calibrate, press and hold the

reset button on the compass module

for approximately eight seconds and

release.

4. Slowly drive the vehicle in a

circle (less than 5 km/h [3 mph]) until the CIRCLE SLOWLY TO

CALIBRATE display changes to CALIBRATION COMPLETED. It will take

up to five circles to complete calibration.

2007 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

117

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 375 376

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Expedition v.2 Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Expedition v.2