Ford 2007 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 155)

been deactivated. The horn will chirp once and honk once (one short

and one long) to indicate the perimeter lighting feature has been

activated.

8. Turn the ignition to the 1 (LOCK) position to exit the procedure.

Note: The horn will chirp once to confirm the procedure is complete.

KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry keypad to:

• lock or unlock the doors without using a key,

• activate or deactivate the Autolock feature if equipped

• release the liftgate glass,

The keypad can be operated with the factory set 5–digit entry code; this

code is located on the owner’s wallet card in the glove box and is

available from your authorized dealer. You can also create your own

5–digit personal entry code.

When pressing the controls on the keyless entry keypad, press the

middle of the controls to ensure a good activation.

Programming your own personal entry code

To create your own personal entry code:

1. Enter the factory set code.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5–digit code.

Each number must be entered

within five seconds of each other.

4. Three unique personal entry

codes can be stored:

• Pressing 1 • 2 assigns driver 1 settings.

• Pressing 3 • 4 assigns driver 2 settings.

• Pressing 5 • 6, 7 • 8, or 9 • 0 assigns Driver 3 settings.

5. The doors will again lock then unlock to confirm that your personal

keycode has been programmed to the module.

• Do not use five numbers in sequential order.

• The factory set code will work even if you have set your own personal

code.

Erasing personal code

1. Enter the factory set 5–digit code.

2. Within five seconds, press the 1 • 2 on the keypad and release.

2007 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

155

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 375 376

Pas de commentaire

Ford 2007 Expedition v.2 Manuel d'utilisateur Page 155