Ford 2007 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 333)

100

101

• If required, add engine oil to the

engine. Refer to Adding engine

oil in this chapter.

• Do not overfill the engine

with oil. Oil levels above this

mark may cause engine

damage. If the engine is

overfilled, some oil must be

removed from the engine by an

authorized dealer.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

upper hole or the MAX mark on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

1/4 of a turn until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level indicator and/or the engine oil filler cap removed.

2007 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

333

1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 375 376

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Expedition v.2 Manuel d'utilisateur Page 333

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Expedition v.2